FEATURE OF AN ESTIMATION OF ECONOMIC EFFICIENCY OF MANUFACTURE OF METAL PRODUCTS FROM THE TITAN WITH HIGH DEGREE OF READINESS
https://doi.org/10.17073/2072-1633-2010-4-47-51
Abstract
It is shown that an increase in the added cost can serve as an indicator of the high degree of readiness of titanium products. For the purpose of comparison the authors single out four possible levels of formation of the added cost.
It is found that for comparison of indicators at various levels their specific values per one rouble of the sold products should be counted. A system of indicators to characterize formation of the added cost and also production efficiency at separate levels has been developed.
The suggested technique allows to analyze the structure of an increase in the added cost in the concrete conditions of titanium products manufacture, to single out the most significant factors of the cost formation and to estimate the efficiency on separate levels of titanium products manufacture.
About the Authors
L. A. Kostygova
МИСиС
Russian Federation
Russian Federation
A. A. Hotinsky
ОАО «ВЭБ-лизинг»
Russian Federation
Russian Federation
References
1. Шугаль Н.Б., Ершов Э.Б. Теоретическая модель взаимосвязи элементов добавленной стоимости и конечного продукта // Проблемы прогнозирования. 2008. № 1. С. 33–54.
2. Ларионова И.А., Рожков И.М., Пятецкая А.В. Диагностика предприятия с использованием интегральных показателей и оптимизационных моделей. – М.: МИСиС, 2007. – 248 с.
3. Сорокина Н.А. Анализ динамики добавленной стоимости // Аудит и финансовый анализ. 2008. № 4. С. 117–119.
4. Малютин А. Добавленная стоимость в управлении предприятиями. Экономист. 2008. № 7. С. 69–76.
Review
For citations:
Kostygova L.A., Hotinsky A.A. FEATURE OF AN ESTIMATION OF ECONOMIC EFFICIENCY OF MANUFACTURE OF METAL PRODUCTS FROM THE TITAN WITH HIGH DEGREE OF READINESS. Russian Journal of Industrial Economics. 2010;(4):47-51. (In Russ.) https://doi.org/10.17073/2072-1633-2010-4-47-51
Views:
371
Email this article 