Preview

Russian Journal of Industrial Economics

Advanced search

Justification for using resourcesaving banding technology in renovative production

https://doi.org/10.17073/2072-1633-2021-4-425-432

Abstract

The article substantiates the expediency of applying the basics of resource saving in the development of innovative technologies for strengthening serial parts and restoring worn ones. At the same time, the main task is the rational use of available material resources in the conditions of a decline in production, when it becomes profitable to restore metal-intensive parts worn out to a critical level. In capital repair of machines, the main problems are associated with the energy intensity of the process and a significant number of rejected parts that cannot be restored. Currently, most of the worn-out metal-intensive cast iron and steel body parts that have exhausted the resource are subjected to energy-intensive melting. For the reuse of metal-consuming parts in operation, a technology has been proposed for multilayer banding of a worn surface, in which steel tape is used instead of traditional banding rings. Winding the tape occurs under an interference in several layers. In this case, a multilayer bandage with interturn stresses is formed, which is not inferior in strength to a whole banding ring. The use of a steel “bandage” for the “treatment” of parts reduces the metal consumption for its manufacture by 2.5 times in comparison with the well-known one-piece ring made of round steel. As an example, the article substantiates the possibility of carrying out the banding process in relation to the restoration and strengthening of the seat under the bearing of the housing part. A multilayer bandage can also be used in the recovery of metal-intensive rolling rolls written off in scrap used on broadband cold rolling mills.

About the Authors

K. P. Kolotyrin
Vavilov Saratov State Agrarian University
Russian Federation

Konstantin P. Kolotyrin – Dr.Sci. (Econ.), Professor of the Project Management and Foreign Economic Activity in Agro-Industrial Complex

1 Teatralnaya Sq., Saratov 410012, Russian Federation



S. A. Bogatyrev
Vavilov Saratov State Agrarian University
Russian Federation

Sergey A. Bogatyrev – Dr.Sci. (Eng.), Professor of the Project Management and Foreign Economic Activity in Agro-Industrial Complex

1 Teatralnaya Sq., Saratov 410012, Russian Federation



D. Yu. Savon
National University of Science and Technology “MISIS”
Russian Federation

Diana Yu. Savon – Dr.Sci. (Econ.), Professor of the Department of Industrial Management

4 Leninskiy Ave., Moscow 119049, Russian Federation



References

1. Solovyov S.A., Lyalyakin V.P., Goryachev S.A., Mishina Z.N., Gerasimov V.S., Solovyov R.Yu., Chernoivanov V.I., Golubev I.G. Innovative directions of development of the repair and maintenance base for agricultural machinery. Moscow: FSBSI “Rosinformagrote”; 2014. 160 p. (In Russ.)

2. Muravyova A.V., Kalinina N.E. The effectiveness of restoring the health of rolling rolls by the banding method. Eurasian Union of Scientists (EUS). 2016;4(25):101–103. (In Russ.). URL: https://cyberleninka.ru/article/n/effektivnostvosstanovleniya-rabotosposobnosti-prokatnyhvalkov-metodom-bandazhirovaniya/viewer (accessed on 10.08.2021).

3. Firkovich A.Yu., Kushnarev A.V. et al. Experience in restoring backup rolls by the banding method with wear-resistant materials. Chernye Metally. 2002;(1):29–30. (In Russ.)

4. Belevsky L.S., Firkovich A.Yu. et al. Compound rolling rolls. Magnitogorsk: Bauman University; 2004. 206 p. (In Russ.)

5. Shinkevich A.I., Kudryavtseva S.S., Shinkevich M.V., Salimianova I.G., Ishmuradova I.I. Improving the efficiency of production process organization in the resource saving system of petrochemical enterprises. International Journal of Energy Economics and Policy. 2019;9(4):233–239. https://doi.org/10.32479/ijeep.7966

6. Rudik F.Ya., Scriabin L.Yu., Kovylin A.P., Popova A.V., Volodin V.V. Improving wear resistance and fatigue strength of cutting tools in processing industry. Mechanical Engineering Bulletin. 2015;(4):43–47. (In Russ.). URL: https://www.mashin.ru/files/2015/ve0415_web.pdf (accessed on 10.08.2021).

7. Patent for utility model No. 41269 of the Russian Federation, MKI V23R 6/00. Shestakov A.O., Bogatyrev S.A., Kupin I.V., Charkin Yu.A. A bandage for restoring and strengthening the bearing seat in the housing of the drive axle of a wheeled tractor. Declared 06.05.2004; publ. 20.10.2004. (In Russ.). URL: https://patents.s3.yandex.net/RU41269U1_20041020.pdf (accessed on 10.08.2021).

8. Bogatyrev S.A., Safonov V.V., Elkin S.Yu. Results of studying the model of stressed condition of the axle arm of a wheeled tractor. Nauchnoe obozrenie = Scientific Review. 2014;(6):17–28. (In Russ.)

9. Patent for utility model No. 34109 of the Russian Federation, MPK V23P 6/00. Shestakov A.O., Bogatyrev S.A., Kupin I.V. Bandage to restore the sleeve of the drive axle of a wheel tractor. Declared 20.06.2003; publ. 27.11.2003. (In Russ.). URL: https://yandex.ru/patents/doc/RU34109U1_20031127 (accessed on 10.08.2021).

10. Gun G.S. Innovative methods and decisions in materials processing. Vestnik of Nosov Magnitogorsk State Technical University. 2014;(4):99–113. (In Russ.)

11. Kolotyrin K.P., Bogatyrev S.A., Savon D.Yu., Aleksakhin A.V. Use of resource-saving technologies in fabrication and restoration of steel bushing-tipe components via hot plastic deformation. CIS Iron and Steel Review. 2019;(18):38–41. (In Russ.) https://doi.org/10.17580/cisisr.2019.02.08

12. Skripalenko M.M., Bazhenov V.E., Romantsev B.A. Computer modeling of chain processes in the manufacture of metallurgical products. Metallurgist. 2014;58(1-2):86–90. https://doi.org/10.1007/s11015-014-9873-7

13. Tigunov L.P., Pikalova V.S., Bykhovsky L.Z. The alloying metals in Russia. The mineral and raw materials base in Russia: the status, utilization, prospects for the development. Ferrous Metallurgy. Bulletin of Scientific, Technical and Economic Information. 2017;(12):3–11. (In Russ.). URL: https://chermetinfo.elpub.ru/jour/article/view/754 (accessed on 10.08.2021).

14. Tsekov V.I. Basics of restoring parts of metallurgical equipment. Moscow: Metallurgiya; 1984. 328 p. (In Russ.)


Review

For citations:


Kolotyrin K.P., Bogatyrev S.A., Savon D.Yu. Justification for using resourcesaving banding technology in renovative production. Russian Journal of Industrial Economics. 2021;14(4):425-432. (In Russ.) https://doi.org/10.17073/2072-1633-2021-4-425-432

Views: 428


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 2072-1633 (Print)
ISSN 2413-662X (Online)